Product
Extraction Tank Series
Straight type extraction tank
Product Description：
Positive cone extraction tank (traditional type)
The occupied space is small and is widely used in the extraction workshop. The bottom of the slag door is heated to make the extraction of the medicine more complete.
Mushroom type extraction tank
The appearance is large and small, and it is mushroom-like. Large, boiling buffer space is large, not easy to run; lower: the liquid is heated by heat, the heating time is short, and the extraction efficiency is high.
Straight type extraction tank
The shape is slender, occupying a large building space, which is beneficial to heat and mass transfer, shortening the leaching and heating time, improving the extraction efficiency, and being suitable for the alcohol extraction and seepage system.
Inverted cone extraction tank
The shape is small and large, and it has an inverted cone shape. The most prominent feature is that the slag is very convenient and the building space is short.
Double cylinder extraction tank
DTQ type dynamic extraction tank
use
The multifunctional extraction tank is a special equipment that uses a liquid solvent to diffuse certain components of the solid matter. It is suitable for the extraction of active ingredients from the roots, stems, leaves, flowers, fruits, seeds and animals of various plants, such as brain, bones, organs and natural minerals. It meets the production requirements of water and various organic solvents such as ethanol and ether. It can meet the requirements of various extraction processes such as pressure extraction, atmospheric pressure extraction, and vacuum extraction, as well as various production conditions such as high temperature, normal temperature and low temperature. It is widely used in the production of pharmaceuticals, food, beverages, health products and APIs.
Technical characteristics
1. Pneumatic control The self-locking slag discharge door not only has no leakage, but also ensures that the door will not automatically open and be safe and reliable in case of sudden power failure or gas stop.
2. The specially designed recoil device can not only overcome the material deposition phenomenon in the extraction tank, but also increase the diffusion rate, and use the temperature of each part in the tank to ensure the extraction effect.
3. The specially improved side discharge structure not only accelerates the discharge rate, but also solves the problem that the discharge of flower medicines is easy to block, and is easy to handle and easy to clean at the same time.
4, the defoamer can not only effectively prevent the condenser blockage caused by the "flooding" phenomenon, but also easy to clean, easy and convenient to operate.
5. The new oil-water separation device not only collects light oil, but also collects heavy oil, which is intuitive and convenient to operate.
6. The segmented heating method not only satisfies the requirements of “text and fire” in the extraction process, but also effectively guarantees the sub-boiling state during the extraction process.
structure
Commonly used structural forms include: positive cone type extraction tank (conventional type), straight-through type extraction tank, mushroom type extraction tank, inverted cone type extraction tank and the like.
Complete equipment supply includes: demister, condenser, cooler, oil water separator, filter, cylinder control cabinet and other accessories.
| Model | TQ-0.5 | TQ-1 | TQ-2 | TQ-3 | TQ-4 | TQ-6 | TQ-8 | TQ-10 |
| volume (L) | 600 | 1200 | 2300 | 3200 | 4300 | 6300 | 8500 | 11000 |
| In-can design pressure (Mpa) | None | 0.09 | no | |||||
| Mezzanine design pressure (Mpa) | None | 0.3 | no | |||||
| Feeding port diameter (mm) | 400 | 400 | 400 | 400 | 500 | 500 | 500 | 500 |
| heating area (m2) | 2.4 | 3 | 4.7 | 6.8 | 8 | 10 | 12 | 12 |
| condensing area (m2) | 3 | 4 | 5.4 | 7 | 10 | 12 | 15 | 18 |
| Cooling area (m2) | 1 | 2.2 | 3 | |||||
| Filter area (m2) | 0.25 | 0.3 | ||||||
| Drainage port diameter (mm) | 600 | 800 | 1000 | 1200 | 1400 | 1500 | 1600 | |
| Gas consumption (kg/h) | 235 | 285 | 346 | 570 | 660 | 718 | 903 | 1140 |
| Water consumption (T/) | 1.8 | 2.1 | 2.5 | 4.2 | 4.5 | 5.5 | 6.7 | 6.7 |
| heating the gas pipe mouth (mm) | 32 | 40 | 50 | |||||
| Exhaust nozzle (mm) | 100 | 125 | 150 | |||||
| Cooling water pipe (mm) | 40 | 50 | 65 | 70 | ||||
| Motor power (KW) | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | ||
| Stirring speed (r/min) | 36 | |||||||
